Tag Archives: flower

Shrinky Dink Craft Series: Flower Ring

I’ve been toying with Shrinky Dinks for the past few months because I wanted to release a series of Shrinky Dinky DIYs on our blog. A few weeks ago, I was hired to teach at a children’s party. During the planning stage, I proposed some crafts that are appropriate for girls from the ages of 3-12.

One of the crafts that came to mind was making Shrinky Dink* jewelry. Although this project was not picked to be included in party, I thought I’d share it here because I love how it turned out.

What you need for this project

Materials:

  • “Shrinky Dink*” type plastic from Daiso $2
  • Pack of $7 ring base from Lai Guan at People’s Park Centre
  • E600 glue
  • $10 Oven toaster from Cash Converters
  • Scissors
  • Sharpie Markers
  • Aluminium Foil
  • Baking Paper
  • Tweezer
  • Katrina Alana Flower Pattern (optional)
  • Sealants like Modge Podge, Diamond Glaze, clear embossing Powder, clear nail polish or spray acrylic sealant (optional)

Safety:

  • Work in a well-ventilated place since using a heating device and the baking process might release fumes.
  • Be careful of sharp edges. Make sure you cut or sand down any sharp corners before heating your piece so you don’t have sharp edges on your final piece.
  • Use tweezers or tongs to remove the aluminum foil so that you do not accidentally touch any hot surfaces.
  • Get a cheap oven toaster on sale to use for your crafts. We prefer to keep our craft materials and equipment separate from items we use for food preparation.

Steps:

  1. Draw your design on the Shrinky Dink plastic. I used Sharpie markers to trace my design on the shrink plastic.
  2. Place your template underneath the shrink place and trace or make a free-hand design

  3. Line the tray with crumpled aluminium foil.
  4. Before baking

  5. Bake the Shrinky Dink in an oven toaster according to the instructions of the manufacturer. The plastic will twist and warp as it shrinks.

    The plastic will move and warp as it is shrinking.

    You can take the piece out once the plastic stops warping and it has reduced to about 40% of the original size.

  6. After baking it shrinks to less than 40% of it’s original size

  7. Take out the shrunken piece using a pair of tweezers.
  8. Use tweezers to remove the shrunken plastic to avoid marking the design or getting burns

  9. Place the ring that is lined with baking paper on both sides in the middle of a heavy book to flatten it.
  10. Line the shrunken piece with baking paper and use a heavy book to flatten it

  11. Take out the ring after a minute and wait for it to cool completely before handling it with your hands.
  12. This step is optional. You can use a sealant and coat the surface of the ring so that the design does not get scratched off easily. Make sure that the sealant that you use is non-toxic. I did not seal my ring because I like the matte texture and I am still testing different types of sealants.
  13. Attach the Shrinky Dink piece to the ring base using a bit of E600 glue.

Finished piece

I hope you enjoyed this tutorial and if you decide to make a ring using this tutorial, we would love to see a photo of your ring or hashtag us #katrinaalana. *Shrinky Dink is a brand of shrink plastic. We are not using the Shrinky Dink brand of plastic however since the company name / product is more well-known than the material, we refer to Shrinky Dink as shrink plastic.

Pops of Color: Hibiscus

We were doing a photoshoot at the Singapore Botanic Gardens a few weeks ago and I saw this lovely flower on the floor and I had to stop what I was doing and marvel at its beauty. I love moments like these when a something as simple as a flower can stop time and make everything quiet.

Hibiscus

Sponsored Post: Kokoru Corrugated Paper

We were asked to review the Kokoru Corrugated Paper by toprint.com.sg, the local distributor. We were given several packs of Kokoru Ichi, which are long strips of colorful paper, and Kokoru Hachi, which comes in A4 size, to create 3d creations. You can create so many objects by combining the basic shapes.

Gnome Garden

You can copy the designs from the back of the packet but we decided to make our own garden themed creations just to see if it was really easy to come up with an original design.

Bird’s Nest

The most difficult part is coming up with the design. Once you have a design in mind, you can easily execute it if you built the design using basic shapes. All you need is a pair of scissors, pencil, hole puncher, and hot glue gun to bring your creation to life.

The Flower and The Bee

When doing this project be extra careful of the hot glue gun. We managed to burn ourselves with the melted hot glue a few times because we got a bit careless.

Overall we had fun making the models. This is a great activity for kids but you need to be careful with the hot glue gun. You can buy Kokoru products at Evergreen stores.